Organics

The degree of purity of pharmaceutical active ingredients derived from melting behavior, the oxidation of fats and oils, or the curing of adhesives and powder paints are only some of the many topics that can be studied with DSC.

With TG, information can be gathered about such topics as the denaturation of proteins, vapor pressure and solvent content of paints.

Using TMA and DMA, the coefficient of thermal expansion can be determined, and the penetration behavior and visco-elastic behavior of viscous fluids, pastes and powders can be described.

DEA can trace the flow properties of pastes and other masses, even during processing.

With LFA, the thermal diffusivity even of melts and liquids can be measured and the thermal conductivity determined.

• Literature

• Service / Support

• Software

• Products / Solutions

Our product recommendation for you:

DSC 204 F1 Phoenix®
Very high sensitivity and resolution can be realized with this premium Differential Scanning Calorimeter (DSC), which also features an automatic sample changer (ASC), temperature modulation (TM-DSC), baseline optimization (BeFlat®), correction of thermal resistance and time constants (DSC-correction), even coupling to QMS and FTIR as well as UV-extension for photo-calorimetry.
more information

Photo-DSC 204 F1 Phoenix®
The Photo-DSC 204 F1 Phoenix®, Differential Scanning Calorimeter, is our answer to the market trend seeking solutions for analyzing the UV curing of light-activated resin systems, adhesives, paints, coatings and dental masses. Further application areas include determining the effect of light on the shelf life of foods or technical oils, fats and lubricants.
more information

DSC 204 HP Phoenix® - High-pressure Differntial Scanning Calorimeter
DSC measurements with selectable gas pressure allow additional possibilities for the study of chemical reactions, vaporization processes (ASTM E 1782), adsorption and desorption, and aging studies (ASTM E 1858, ASTM D 6186, ASTM E 2009, ASTM D 5483). The DSC 204 HP Phoenix®, Differential Scanning Calorimeter, is ideally configured for these applications.
more information

TG 209 F3 Tarsus
This easy-to-use thermo-microbalance (TGA) was developed especially for routine applications in the field of plastics, but also for the chemical industry. It is the ideal starter unit up to 1000°C and, together with the DSC 200 F3 Maia®, represents a cost-effective overall concept.
more information

TG 209 F1 Iris®
This premium thermobalance (TGA), through flexibility in the fittings, covers all imaginable applications of a modern TGA in the range up to 1000°C. High sensitivity, short cooling times and the automatic sample changer (ASC), make this TGA particularly well-suited for the compositional analysis of plastics and rubbers.
more information

TMA 202 (phase-out model)
With a unique concept for simple operation, the TMA 202 is the routine instrument for materials developers and polymer users and enables expansion, penetration, bending and tension measurements on polymers.
more information

DEA 230 Epsilon Series
There are three different systems in the 230 Epsilon series of Dielectric Cure Monitors: the high-performance, 2-channel DEA 230/2 with the broadest measurement and frequency range, particularly for product development and process optimization, the single-channel DEA 230/1, and the 10-channel DEA 230/10, also suitable for applications in manufacturing.
more information

QMS 403 C Aëolos®
The QMS 403 Aëolos® is a very compact mass spectrometer with a heated capillary inlet system, specially designed for routine analysis of volatile decomposition products of thermal analysis (instrument for EGA: Evolved Gas Analysis).
more information

FTIR Coupling
Different thermo-analysis systems can be combined with a Fourier Transform-Infrared Spectrometer (FTIR), which has proved its efficiency especially in the organic field. (EGA method: Evolved Gas Analysis)
more information

APTAC 264
APTAC 264 is capable of studying exothermic reactions at temperatures from ambient to 500ºC and pressures ranging from vacuum to 140 bar (2,000 psia). As a calorimeter, APTAC 264 can detect and track exotherms at heat generation rates ranging from 0.04 K/min to 400 K/min.
more information

ARC® 244
The cost-effective Accelerating Rate Calorimeter 244 (ARC® 244) is designed to safely measure the amount and rate of heat release associated with the processing or storage of chemicals with a sample volume of 0.5 ml to 7 ml. The key features are high performance, safety, usability, and flexibility with data integrity and robustness in a temperature range from ambient to 500°C.
more information

ARC® 254
This new Accelerating Rate Calorimeter (model ARC® 254), formerly known as TIAX New ARC 5000, is a specialized instrument to help industry operate safely and profitably. Highly versatile, miniature chemical reactor, it measures the thermal and pressure properties of exothermic chemical reactions. The resulting information helps engineers and scientists identify potential hazards and tackle key elements of process optimization and thermal stability.
more information

NEW: MMC 274 Nexus®
The MMC 274 Nexus® can be used in conjunction with the DSC and the Accelerating Rate Calorimeter where its special features better match the application. The MMC 274 Nexus® is used for measuring heats of reaction, reaction rates, endotherms, heat capacities, phase changes, gas generation rates and vapor pressures.
more information