Thermomechanical analysis combined with exact expansion measurement for the highest demands

TMA 402 - Vertical thermomechanical analyzer

 

General

Technique

Software

Applications

Accessories

Literature

TMA 402 - Technical Specifications (subject to change)

• Temperature range: -150°C ... 500°C, RT ... 1000°C, (2 exchangeable furnace types)

• Heating and cooling rates: 0.01 K/min ... 50 K/min

• Sample holder: fused silica
  expansion measurements
  penetration measurements with different push rod diameters
  bending measurements (12 mm and 20 mm (special furnace))
  tension measurements

• Load: static 0.1 cN ... 200 cN
  rectangular pulse 0 cN ... 30 cN, 0.03 Hz ... 5 Hz

• Measuring ranges: 250/2500 µm

• Sample length: 0 mm ... 50 mm

• Sample diameter: max. 9 mm

• Δl resolution: 0.0625 nm/0.625 nm

• Temperature measurement with thermocouple at / near the sample

• Atmospheres: inert, oxidizing, static and dynamic

• Gas flow meter and valve for purge gas (optional)

• c-DTA® for the calculated DTA-signal from TMA measurements, ideal for temperature calibration (optional)

• Vacuum-tight up to 10-2 mbar

Schematic of TMA 402 measuring part

Expansion and penetration measurement

Measurement under tension

Bending measurement

Please also visit the following product pages:

DIL 402 C

DMA 242 C