| |
|
|
Thermomechanical analysis in the polymer sector
TMA 202 - Thermomechanical Analyzer
TMA 202 - Technical Specifications (subject to change)- Temperature range: -150°C ... 600°C (liquid nitrogen cooling)
- Heating and cooling rates: 0.01 K/min ... 50 K/min
- Sample holder: fused silica
expansion measurements
penetration measurements
bending measurements (10 mm and special insertion)
tension measurements
- Load: static 1 cN ... 100 cN, in 1 cN steps
- Measuring ranges: 5000 µm
- Sample length: 0 mm ... 20 mm
- Sample diameter: max. 10 mm
- Temperature measurements with thermocouple at / near to the sample
- Atmospheres: inert, oxidizing, static and dynamic
- Gas flow meter and valve for purge gas (optional)
- c-DTA® for the calculated DTA-signal from TMA measurements, ideal for temperature calibration (optional)
Per favore, visitate anche le seguenti pagine prodotti: |
|
stampa la pagina
torna su
indietro
