The easy-to-use and cost-effective thermo-microbalance

TG 209 F3 Tarsus - Thermo-Microbalance

To protect the weighing system against the hot furnace and to minimize any system drift during long-term measurements, the standard TG 209 F3 Tarsus is equipped with a thermostat. To achieve a lower starting temperature the connection of a cooling thermostat is highly recommended.

Linked to the optimal configuration using mass flow controllers (MFC), a membrane pump can also be connected, enabling evacuation of the thermo-microbalance. Thus, measurements in pure inert gas atmosphere (pyrolysis) are guaranteed.

There is a wide variety of different crucibles of aluminum oxide, platinum, aluminum, graphite and fused silica available in different sizes.

The automatic sample changer, ASC, for up to 20 different crucible types, handles your routine measurements in quality control. Day and night it works for you to free your time for other tasks, allowing you to make optimal use of the TG 209 F3 Tarsus, even over the weekend. Of course, each sample can be assigned a different measurement and evaluation program. Easy-to-understand input fields lead you through the programming of a series of measurements. Unplanned analyses can also be inserted into a pre-programmed series of measurements already in progress.

Generale

Per favore, visitate anche le seguenti pagine prodotti:

DSC 200 F3 Maia®

DSC 204 F1 Phoenix®

TG 209 F1 Iris®

NEW: STA 449 F3 Jupiter®

DMA 242 C