Prove su Refrattari:
Refrattarietà sotto carico (RUL) e
Deformazione in compressione (CIC)
Modulo di Rottura (HMOR)
Refrattarietà (PCE)
Conduttività Termica (TCT)
Test speciali di resistenza sono stati messi a punto per ceramici refrattari, che sono composti molto eterogenei. La Refrattarietà sotto Carico (RUL) e la Deformazione in Compressione (CIC) identificano la resistenza alla deformazione di un pezzo sono un carico definito in funzione di tempo e temperatura. Il modulo di rottura ad alte temperature (HMOR) è determinato con un analizzatore di modulo di rottura a caldo. Il comportamento in fusione di questi ceramici eterogenei è determinato indirettamente attraverso la comparazione con i cosiddetti coni Seger (PCE- Cono Pirometrico Equivalente).
Tutto ciò in conformità con gli standard strumentali ed applicativi es. ISO 1893, ISO 3187, ISO 5013, DIN EN 993 -7/8/9/12, DIN 51048, DIN 51053, DIN 51063.
HMOR 422 D/3 - Apparatus for testing MORThe modulus of rupture of refractory ceramics is determined as the amount of force applied to a rectangular test piece of specific dimensions until failure occurs. The available models of the HMOR 422 hot modulus of rupture apparatus are used to measure the failure load as well as bending under load or deformation force.
Maggiori informazioni
PCE 428 - Pyrometric Cone EquivalentDetermination of the melting point of refractory materials is only possible indirectly through comparison with the softening of standard cones. In the PCE 428, the pyrometric cone equivalent can be ascertained visually up to a maximum temperature of 1700°C.
Maggiori informazioni