Peak performance on thermal expansion measurements up to 2000°C
DIL 402 C – Próżnioszczelny dylatometr w układzie poziomym
Info & service :
Informacja o produkcie
Jeżeli Państwo potrzebują informacji na temat wybranego produktu, z przyjemnoscią udzielimy Państwu fachowych odpowiedzi.
Kontynuuj
Informacja serwisowa
Dowiedz się więcej o naszym serwisie i wspraciu merytorycznym. Jesteśmy do Państwa dyspozycji.
Kontynuuj
Iron
This figure depicts the linear thermal expansion and physical coefficient of thermal expansion (physical CTE) of iron. The sample was measured at a heating rate of 5 K/min in a helium atmosphere. At 906°C (peak temperature in the physical alpha) a shrinkage step was detected. This is due to a change in the lattice structure (bcc -> fcc). Another change in the lattice structure (fcc -> bcc) was detected at 1409°C. The deviation between the measured and literature transition temperatures is due to a small impurity content.
Alumina green body
An alumina green body was tested with the DIL 402 C employing the NETZSCH Rate Controlled Sintering (RCS) software. The measurement was carried out at a heating rate of 10 K/min. The start/stop mode of the RCS software was used. The threshold value was 10 µm/min (0.046 %/min). The heating rate was reduced by RCS during sintering to achieve a constant shrinkage rate. The influence of additives (e.g. organic binder, clays) was measured up to 1150°C. The main sintering step occured between 1150°C and 1350°C.
Glass Ceramic - Zerodur
Zerodur is a glass ceramic produced by Schott Glas in Mainz, Germany. It is designed for zero thermal expansion around room temperature. This material is often used for high performance terrestrial telescopes. The figure shows the linear thermal expansion between -150°C and 100°C. The sample was measured twice at a heating rate of 3 K/min in a helium atmosphere. The measured CTEs between 0°C and 50°C are in excellent agreement with the literature values (Schott brochures).
Silicon nitride
Because of its excellent thermal and mechanical properties, silicon nitride is used more and more for high-tech applications (e.g. valves in automobile engines). Of course, the properties of the final parts are heavily influenced by the production/sintering process. Depicted in this figure is the thermal expansion of a silicon nitride green body. The sintering step starting at 1201°C is due to the influence of the sintering additives. The main shrinkage step occured at 1424°C (extrapolated onset). The effect above 1760°C is most probably due to evaporation of additives.
Odwiedź następujące strony o naszych produktach
)
)
)
)
wydrukuj tą stronę
powrót do góry
powrót
