NETZSCH - Leading Thermal Analysis.   Leading Thermal Analysis  
   
 
 
 

New dimensions in gas analysis

QMS 403 C Aëolos® - Kwadrupolowy spektrometr masowy

 
Ogólna informacje Technika OprogramowanieZastosowanieAkcesoria Literatura  

Info & service :

Informacja o produkcie
Jeżeli Państwo potrzebują informacji na temat wybranego produktu, z przyjemnoscią udzielimy Państwu fachowych odpowiedzi.
Kontynuuj

Informacja serwisowa
Dowiedz się więcej o naszym serwisie i wspraciu merytorycznym. Jesteśmy do Państwa dyspozycji.
Kontynuuj

The QMS 403 Aëolos® quadrupole mass spectrometer is a new compact mass spectrometer with a heated capillary inlet system for routine analysis of gases and, in particular, volatile decomposition products of thermal analysis. This system has been optimized for coupling to differential scanning calorimeters, dilatometers and thermogravimetric analyzers by:

  • Increasing the temperature of the entire gas transfer system to 300°C
  • An improved single-stage inlet system with a low-reaction fused silica capillary and ultrasonic expansion in the ion source
  • Integration of the mass spectrometer software and data exchange for user-friendly operation from the Proteus® thermal analysis software.

The high temperature of the gas transfer system and the absence of pressure reduction orifices practically eliminate condensation of decomposition products during thermal analysis experiments. This achieves a high detection sensitivity and facilitates quantitative detection of all identified gas components.
Via the inlet system with the fused silica capillary, other gas sources can be investigated with the QMS 403 C Aëolos® independent of thermal analysis; for that purpose, the QMS is operated with the self-contained software.

The concept of the NETZSCH thermal analysis instruments has been laid out from the start for coupling with gas analysis systems like the QMS 403 C Aëolos® or an FTIR system with a gas cell, through consistent optimization of the gas paths with complete heating from the furnace to the gas detector. This eliminates gas loss through condensation at cold spots and only very low carrier gas flows are sufficient for complete transfer. The minimal dilution of the volatile sample products released results in high detection sensitivity with the QMS 403 C Aëolos®.

 

Ogólna informacje Technika OprogramowanieZastosowanieAkcesoria Literatura  

Odwiedź następujące strony o naszych produktach

DSC 204 F1 Phoenix®

DSC 204 F1 Phoenix®


DSC 404 F1 Pegasus®

DSC 404 F1 Pegasus®


STA 449 F3 Jupiter®

STA 449 F3 Jupiter®


STA 449 F1 Jupiter®

STA 449 F1 Jupiter®


DIL 402 C

DIL 402 C


 
    wydrukuj tą stronę powrót do góry powrót  
 

Analiza termiczna - Aktualności | Analiza Termiczna - Produkty | Segmenty rynku / przemysłu - Analiza termiczna | Materiały / Aplikacje - Analiza termiczna | Serwis - Analiza termiczna | Seminarium - Analiza termiczna | Applications Measurements | Compliance | Applications Advisory Service | Media Service | Proteus Software | Advanced Software | Kontakt | NETZSCH worldwide | History | DSC / DTA | Multiple Mode Calorimetry (MMC) | TGA Analysis | TG-DSC Analysis (STA) | QMS / FTIR, GC-MS | DIL | TMA | DMA / DMTA | Adiabatic Reaction Calorimetry | DEA | LFA / GHP / HFM / TCT | RUL / HMOR / PCE / TCT | Sitemap | Imprint

Grupa NETZSCH | NETZSCH Grinding & Dispersing | NETZSCH Pumps