NETZSCH - Leading Thermal Analysis.   Leading Thermal Analysis  
   
 
 
 

New dimensions in gas analysis

QMS 403 C Aëolos® - Espectrômetro de Massas Quadrupolar

 
GeralDados TécnicosSoftwareAplicaçõesAcessóriosLiteratura 

Informação & Serviço:

Informação de Produto
Você gostaria de pedir alguma informação adicional sobre algum produto específico? Ficaremos felizes em lhe enviar o que você precisa.
Continuar

Informação de Serviço
Consulte mais sobre nossas ofertas variadas de serviços. Estamos à sua disposição !
Continuar

The QMS 403 Aëolos® quadrupole mass spectrometer is a new compact mass spectrometer with a heated capillary inlet system for routine analysis of gases and, in particular, volatile decomposition products of thermal analysis. This system has been optimized for coupling to differential scanning calorimeters, dilatometers and thermogravimetric analyzers by:

  • Increasing the temperature of the entire gas transfer system to 300°C
  • An improved single-stage inlet system with a low-reaction fused silica capillary and ultrasonic expansion in the ion source
  • Integration of the mass spectrometer software and data exchange for user-friendly operation from the Proteus® thermal analysis software.

The high temperature of the gas transfer system and the absence of pressure reduction orifices practically eliminate condensation of decomposition products during thermal analysis experiments. This achieves a high detection sensitivity and facilitates quantitative detection of all identified gas components.
Via the inlet system with the fused silica capillary, other gas sources can be investigated with the QMS 403 C Aëolos® independent of thermal analysis; for that purpose, the QMS is operated with the self-contained software.

The concept of the NETZSCH thermal analysis instruments has been laid out from the start for coupling with gas analysis systems like the QMS 403 C Aëolos® or an FTIR system with a gas cell, through consistent optimization of the gas paths with complete heating from the furnace to the gas detector. This eliminates gas loss through condensation at cold spots and only very low carrier gas flows are sufficient for complete transfer. The minimal dilution of the volatile sample products released results in high detection sensitivity with the QMS 403 C Aëolos®.

 

GeralDados TécnicosSoftwareAplicaçõesAcessóriosLiteratura 

Por favor, também visite as seguinte páginas de produtos:

DSC 204 F1 Phoenix®

DSC 204 F1 Phoenix®


DSC 404 F1 Pegasus®

DSC 404 F1 Pegasus®


STA 449 F3 Jupiter®

STA 449 F3 Jupiter®


STA 449 F1 Jupiter®

STA 449 F1 Jupiter®


DIL 402 C

DIL 402 C


 
    imprimir esta página voltar ao topo atrás  
 

Análise Térmica - Novidades | Análise Térmica - Produtos/ Soluções | Análise Térmica - Segmentos de Mercado / Indústrias | Análise Térmica - Materiais/Aplicações | Análise Térmica - Serviço | Análise Térmica - Seminários | Aplicações de Medição | Conformidade | Serviço Consultivo de Aplicações | Media Center | Proteus® Software | Software Avançado | Contacto | NETZSCH do Brasil | Calorimetria Exploratória Diferencial / Análise Térmica Diferencial (DSC/DTA) | Calorimetria de Múltiplos Módulos (MMC) | Termogravimetria (TGA) | Termogravimetria Simultânea - Calorimetria Exploratória Diferencial (TGA-DSC) | Análises de Gás / Acoplamentos (QMS, FTIR, TG-GC-MS, SKIMMER) | Dilatometria (DIL) | Análises Termomecânicas (TMA) | Análise Térmica Dinâmico-Mecânica (DMTA) | Calorimetria Adiabática de Reação | Análises Dielétricas (DEA) | usividade e Condutibilidade Térmica (LFA / GHP / HFM / TCT) | Testes de Refratários (RUL/CIC, HMOR, PCE, TCT) | Sitemap | Imprint

Grupo NETZSCH | NETZSCH Moagem & Dispersão | NETZSCH Bombas