Trend-Setting Technology

TMA 402 F1/F3 Hyperion® - Thermomechanical Analyzer

 

General

Technique

Software

Applications

Accessories

Literature

The modular design of the TMA 402 Hyperion® makes it unique among the competition
To adjust the instrument for the respective temperature ranges, all that needs to be done is to exchange the furnace. This can be done by the operator. If using the optional double furnace hoist, switching to a second furnace takes only moments.

Sample holder systems tailored to the task
Depending upon the question at hand and the geometry of the sample, the operator has a variety of sample holders to choose from. Holding devices for expansion, penetration, and tension measurements are available, as well as push rods and supports for analyses in 3-point bending. Accessories for the temperature range up to 1000°C are made of fused silica. For the high temperature range, aluminum oxide varieties are available.

In the TMA 402 Hyperion®, the thermocouple can be changed quickly and easily. Besides Type K, the S and E varieties are also available. The system electronics recognize the installed sensor automatically.

Special sample holders
With the help of special sample containers, the expansion behavior of powders, pastes and liquids can be analyzed, as can metals all the way to the melting point. Accessories for experiments on swelling behavior upon immersion are also available.

Evolved Gas Analysis (EGA): Coupling with MS / FTIR
To analyze gases evolving upon heating (EGA), the TMA 402 Hyperion® can be coupled to a mass spectrometer and/or an FTIR spectrometer.

Sample holder and push rods
(fused silica, aluminum oxide)

Please also visit the following product pages:

DIL 402 PC

DIL 402 C

DMA 242 D