Number
|
Description |
| R-271-05 |
D. Walter, E. Füglein
"High-pressure DSC investigations of the transformation geothite to hematite" |
R-268-05
|
E. Füglein, M. Hollering, T. Rampke
"Visualization of Smallest Energetic Effects by Means of a High Sensitivity DSC Sensor" |
| R-267-05 |
J. Opfermann, Hans Delesky
"Optimization of the Curing Process of Epoxy-resin-based Casting Compounds using the DSC and Kinetic Analysis" |
| R-261-04 |
S. Knappe, J. Blumm
"From Light Flash to Heat Transfer of Polymers"
translation from Labor Praxis, 10/2004 |
| R-260-04 |
Knappe, J. Blumm
"Vom Lichtblitz zum Wärmetransport bei Polymeren"
published in Labor Praxis, 10/2004 |
R-241-04
|
J. Blumm, J. Opfermann
"Thermophysical Properties Characterization of Multi-Layer Systems and Liquids using Differential Scanning Calorimtry and the Flash Technique"
published in Thermans 2004 |
R-239-03
|
S. Knappe
"Following Cross-linking, Optimized Paint Curing by Means of Dielectric and Kinetic Analysis"
translation from Farbe & Lack 109; 9/2003, |
| R-238-03 |
K. Zahouily, C. Decker, E. Kaisersberger, M. Grüner
"Real-time UV cure monitoring – dielectric and infrared spectroscopy analyses show close linear correlation"
published in ECJ 11/03, 14-18 |
R-235-03
|
S. Knappe
"Vernetzung verfolgen, Optimierte Lackhärtung durch dielektrische und kinetische Analyse"
published in Farbe & Lack 9/2003, p.18ff |
R-234-03
|
E. Kapsch, A. Rager
"TG-FTIR Applications; Sweet & Sour in TG-FTIR coupling" |
| R-230-03 |
Dr. A. Rager, Dr. E. Kapsch, A. Schranner
Sonderdruck GIT; "Süß-Saures in der TG-FTIR Kopplung"
published in G.I.T. Labor-Fachzeitschrift 12/2002, 1356-1359 |
| R-228-03 |
S. Knappe
"Following the Curing Trail, Variety of Sensors for Laboratory and In-Process Use (DEA)" |
| R-227-03 |
S. Knappe
"Der Aushärtung auf der Spur; Sensorvielfalt im Labor und im Prozess (DEA-Artikel)" |
R-221-02
|
J. Blumm
"Methoden zur Ermittlung der Wärmeleitfähigkeit"
published in Labor Praxis, 11/2002 |
| R-220-02 |
S. Knappe
"DSC - schnell, sicher und zuverlässig"
published in KunststoffTrends 3/2002 |
| R-219-02 |
J.R. Opfermann, E. Kaisersberger, H.J. Flammersheim
"Model-free analysis of thermoanalytical
data-advantages and limitations"
published in Thermochimica Acta 391 (2002) 119-127 |
| R-218-02 |
J. Blumm
"Measuring Thermal Conductivity"
published in Ceramic Industry June 2005, 53 |
| R-214-02 |
J. R. Opfermann, E. Kaisersberger, H.-J. Flammersheim
"Modellfreie kinetische Analyse thermoanalytischer Daten – Vorteile und Grenzen" |
| R-212-02 |
S. Knappe
"Optimale Wärmedämmung durch niedrige Wärmeleitfähigkeit"
published in KunststoffTrends 2/2002 |
| R-203-02 |
J. Blumm
"Wärmeleitfähigkeit von keramischen Werkstoffen"
published in Lehrbuch-Labor & Forschung 17 |
| R-200-01 |
H.J. Flammersheim, J. Opfermann:
"Investigation of Epoxide Curing Reactions by Differential Scanning Calorimetry - Formal Kinetic Evaluation"
published in Macromolecular Materials and Engineering 286 (2001) 143-150 |
| R-198-01 |
J. Opfermann:
"Kinetic analysis using multivariate non-linear regression I. Basic concepts"
published in Journal of Thermal Analysis and Calorimetry, Vol. 60 (2000) 641-658 |
| R-187-01 |
S. Knappe:
"Reaktive Polymere in der Automobilindustrie"
published in KunststoffTrends 1/2002 |
| R-184-01 |
J. Blumm, E. Kaisersberger:
"Accurate Measurement of transformation energetics and specific heat by DSC in the high-temperature region"
published in Journal of Thermal Analysis and Calorimetry, Vol. 64 (2001) 385-391 |
| R-183-01 |
J. Blumm:
"STA 409 PC LUXX - Simultane Messungen von kalorischen Effekten und Masseänderungen zwischen Raumtemperatur und 1550°C"
published in G.I.T. Laboratory Journal 4/2001 |
| R-176-00 |
H.J. Flammersheim:
"Formal-kinetic evaluation of polyaddition reactions - results of a round-robin test, initialised by the working group ´Polymers´ of the German Society for Thermal Analysis (GEFTA)"
published in Thermochimica Acta 361 (2000) 21-29 |
| |
J. Blumm, J. Opfermann, U. Janosovits, H.J. Pohlmann:
"Simulation of the sintering behavior of high-tech ceramics by means of dilatometry and thermokinetic analysis"
presented at the 15th European Conference on Thermophysical Properties |
| R-175-00 Part A |
M.E. Brown, M. Maciejewski, S. Vyazovkin, R. Nomen, J. Sempere, A. Burnham, J. Opfermann, R. Stey, H.L. Anderson, A. Kemmler, R. Keuleers, J. Janssens, H.O. Desseyn, Chao-Rui Li, Tong B. Tang, B. Roduit, J. Malek, T. Mitsuhashi:
"Computational aspects of kinetik analysis. Part A: The ICTAC kinetics project-data, methods and results"
published in Thermochimica Acta 355 (2000) 125-14 |
R-175-00 Part D
|
A.K. Burnham:
"Computational aspects of kinetic analysis. Part D: The ICTAC kinetics project - multi-thermal-history model-fitting methods and their relation to isoconversional methods"
published in Thermochimica Acta 355 (2000) 165-170 |
| R-171-00 |
J. Blumm, J. Henderson:
"Measurement of the Volumetric Expansion and Bulk Density of Metals in the Solid and Molt Regions"
published in High Temperatures - High Pressures |
| R-170-00 |
J. Blumm:
"Dilatometrie an keramischen Werkstoffen"
published in Lehrbuch-Labor & Forschung 17 |
| R-167-99 |
H.J. Flammersheim, J. Opfermann:
"The dimerization of cyclopentadiene - a test reaction for the kinetic analysis of DSC measurements and the performance of a kinetic evaluation program"
published in Thermochimica Acta 337 (1999) 149-153 |
| R-166-99 |
H.J. Flammersheim, J. Opfermann:
"Formal kinetic evaluation of reactions with partial diffusion control"
published in Thermochimica Acta 337 (1999) 141-148 |
R-165-99
|
E. Post, E. Kaisersberger, S. Knappe, W.-D. Emmerich:
"An Epoxy Resin tells its Life Story / Thermal Analysis as a constant companion from development to disposal"
published in Journal of Thermal Analysis and Calorimetry Vol. 57 (1999), p. 265-273 |
| R-164-99 |
Dr. M. Harenbrock. S. Knappe:
"Zuverlässigkeit für die Automobilindustrie (Saugrohrfertigung bei Mann & Hummel - DSC sichert Qualität)"
published in Kunststoffberater 6/99, p. 29ff |
| R-163-99 |
D. Hesekamp, M.H. Pahl:
"Curing effects on viscosity of reactive epoxy resin adhesives"
published in Rheologica Acta, Vol. 35, No. 4 (1996) |
| R-160-99 |
E. Kaisersberger:
" Specific heat determination by differential scanning calorimetry: improvements through automated sample handling"
published in High Temperatures - High Pressures, 1999, volume 31, 55-61 |
| R-159-99 |
E. Kaisersberger, E. Post
"Applications for skimmer coupling systems, combining simultaneous thermal analysers with mass spectrometers"
published in Thermochimica Acta 324 (1998) 197-201 |
| R-156-99 |
A. Rager, P. Turner, E. Kapsch:
"TG+FTIR: More than just the sum of its parts" |
| R-152-98 |
N. Eckardt, H.J. Flammersheim, H.K. Cammenga:
"The CIS-Trans Isomerization of Azobenzene in the molten state (The useful test reaction for the kinetic evaluation of DSC measurements)"
published in Journal of Thermal Analysis and Calorimetry, Vol. 52 (1998) 177 |
R-151-98
|
J. Opfermann, J. Blumm, W.D. Emmerich:
"Simulation of the sintering behavior of a ceramic green body using advanced thermokinetic analysis"
published in Thermochimica Acta 318 (1998) 213-220 |
| |
R. Büttner, B. Zimanowski, J. Blumm, L. Hagemann:
"Thermal conductivity of a volcanic rock material (olivine-melilitite) in the temperature range between 288 and 1470 K"
published in Journal of volcanology and geothermal research 80 (1998) 293-302 |
| |
J. Blumm, J. Henderson, L. Hagemann:
"Measurement of the thermophysical properties of an aluminium-silicon casting alloy in the solid and molten regions"
published in High Temperatures - High Pressures 1998, volume 30, 153-157 |
R-149-98
|
M. Maciejewski, C.A. Müller, R. Tschan, Dr. W.-D. Emmerich, A. Baiker
"Novel pulse thermal analysis method and its potential for investigating gas-solid reactions"
published in Thermochimica Acta 295 (1997) 167-182 |
| R-148-98 |
K. Jaenicke-Rößler, G. Leitner:
"TA-MS for high temperature materials"
published in Thermochimica Acta 295 (1997) 133-145 |
| R-140-98 |
R. Gray, S. Knappe:
"Dynamic Mechanical Analysis on High-Modulus composites" |
| |
J. Blumm, J. Henderson, O. Nilsson, J. Fricke:
"Laser flash measurement of the phononic thermal diffusivity of glasses in the presence of ballistic radiative transfer"
published in High Temperatures - High Pressures 1997, volume 29, 555-560
|
R-138-98
|
S. Knappe, R. Merkl:
"Aushärtung und Verarbeitung ungesättigter Polyesterlacke, Einsatz der DSC zur Charakterisierung des Aushärtungs- und Verarbeitungsverhaltens"
published in Farbe & Lack 3/1998, p. 56ff |
| R-137-98 |
E. Treser, S. Rahner:
"Einfluß von Nukleierungsmitteln auf die Polymerkristallation"
published in Labor Praxis, 12/1997 |
| R-134-97 |
H. Klaus-Jürgen Wagner, H. Dr. Uwe Bretschneider, H. Thomas Rampke
Einsatz der DSC bei Schokoladenmassen in der Praxis
"Die Einflußfaktoren im Produktionsprozeß" |
| R-115-96 |
S. Knappe, C. Mayo:
"Thermal Analysis Integrated into QA-Systems of Automotive Suppliers"
published in Kunststoffe plast europe, December 1995 |
| R-114-96 |
S. Knappe:
"The Use of Thermal Analysis in Quality Assurance"
published in Kunststoffe German Plastics 82 (1992) 10, p. 63 |
| R-110-96 |
S. Knappe, C. Mayo:
"Thermische Analyse - integriert im QS-System bei Automobilzulieferern"
published in Kunststoffe, 85 (1995) |
| R-108-95 |
J. Opfermann, W. Hädrich:
"Prediction of the thermal response of hazardous materials during storage using an improved technique"
published in Thermochimica Acta 263 (1995) 29 - 50 |
| R-106-95 |
J. Opfermann, F. Giblin, J. Mayer, E. Kaisersberger:
"An improved method for invariant kinetic parameters and a high level of model differentiation"
published in AMERICAN LABORATORY February 1995 |
| R-094-94 |
S. Knappe, R. Oehmichen
"Product Development and Quality Assurance with Dynamic Mechanical Analysis"
published in Kunststoffe plast europe, July 1994, p. 20 |
| R-092-94 |
S. Knappe, R. Oehmichen
"Produktentwicklung und Qualitätssicherung mit der DMA"
published in Kunststoffe 84 (1994) 7, p. 895ff |
| R-088-94 |
S. Knappe, C. Urso
"Applications of Thermal Analysis in the Rubber Industry"
published in Thermochimica Acta 227 (1993), p. 35-42 |
| R-080-93 |
E. Kaisersberger, S. Knappe, J. Opfermann, H. Möhler
"The Influence of Recycled Material on the Crystallization Kinetics of Thermoplastic Polymers"
published in Journal of Thermal Analysis, Vol. 40 (1993) 821-829 |
| R-076-92 |
S. Knappe
"Thermische Analyse bei der Thermoplastverarbeitung"
published in Kunststoffe 82 (1992) 10, p. 993 ff |
| R-074-92 |
J. Opfermann, E. Kaisersberger:
"An Advantageous Variant of the Ozawa-Flynn-Wall Analysis"
published in Thermochimica Acta 203 (1992) 167-175 |
| R-070-92 |
E. Kaisersberger, J. Opfermann:
"Kinetische Analyse Thermischer Effekte"
published in Laborpraxis 4 (1992) 360-364 |
| R-059-91 |
E. Kaisersberger, J. Opfermann:
"Kinetic Evaluation of Exothermal Reactions Measured by DSC"
published in Thermochimica Acta 187 (1991) 151-158 |
| AS-ger Nr 1 |
J. Opfermann:
"Quantitative Bestimmung der Einzelkomponenten einer Gummimischung mit Hilfe der thermogravimetrischen Analyse und dem Programm Multicomponent Analysis by PLS" |
| AS-eng No. 1 |
J. Opfermann:
"Quantitative determination of single components of rubber mixtures with the help of thermogravimetry and the program Multicomponent Analysis by PLS" |
| AS-eng No. 2 |
J. Opfermann, W.Hädrich:
"Prediction of the thermal response of hazardous materials during storage using an improved technique"
published in Thermochimica Acta 263 (1995) 29 - 50 |
| AS-ger Nr 3 |
J. Opfermann, S. Rahner, O. Kretschmer:
"Quantitative Bestimmung des Gehaltes an Mikrowachs in einem Gemisch mit Paraffin" |
| AS-eng Nr 3 |
J. Opfermann, S. Rahner, O. Kretschmer:
"Quantitative determination of the content of microwax in a mixture with paraffin" |
| AS-ger Nr 4 |
J. Opfermann, H. Delesky, W. Holstein:
"Optimierung des Härtungsprozesses von Vergußmassen auf Epoxidharzbasis mit Hilfe der DSC und der kinetischen Analyse" |
| AS-eng No. 4 |
J. Opfermann, H. Delesky, W. Holstein:
"Optimization of the curing process of epoxy-based casting compounds using DSC and kinetic analysis" |
| AS-ger Nr 5 |
J. Opfermann:
"Bestimmung der optimalen Temperaturführung für das Ausbrennen/Austragen des polymeren Binders eines Sintermaterials auf der Basis von thermogravimetrischen Messungen und kinetischer Analyse" |
| AS-eng No. 5 |
J. Opfermann:
"Determination of the optimal temperature profile for the burn-out/discharge of the polymer binder in a sinter material based on thermogravimetric measurements and kinetic analysis" |
print this page
back to top
back
