Expanded Polystyrene — Thermal Conductivity

One of the most popular materials for the thermal insulation of buildings is expanded polystyrene. The example shows a quality control run on a commercially available expanded polystyrene material (EPS 040). Ten samples of the same batch were tested at 24°C and, according to DIN EN 13163, at 10°C. It can clearly be seen that the deviation between the different samples is less than 1%. The determined thermal conductivity λ 90/90 value according to DIN 13163 was 0.03808 W/(m*K). (measurement with HFM 436 Lambda)

HFM 436 Lambda – ヒートフローメーター

ヒートフローメーターHFM 436 Lambdaは、大型の板状フォーム断熱材の熱伝導率を、固定あるいは調整された 温度勾配で測定されます。内臓 PC あるいは外付けPCが、短い補償時間の後、正確な測定データを出力します。