Thank you for visiting our booths at K Show 2016!

K 2016: The World’s No. I Trade Fair for Plastics and Rubber was again a great success for us.



If you weren’t able to find the time to visit our booths at the K show, or even Duesseldorf, let us offer you a chance to view a short glimpse of the event. Watch the impressions of our presences at your desk or on the go, and get ready to plan your visit for the K show in 2019!

Impression from the K-Show 2016

You visited our booth but missed the Live Demo of our Proteus Software? No problem. Take the chance to see the live measurement and the Proteus presentation now that the recording is available for you.

NETZSCH BoothNETZSCH Booth with focus on Proteus Software
NETZSCH GABO Instruments Booth with the brand new DMA Eplexor
Live Demo of our Proteus Software
Got one of our famous posters?

What Proteus can do for you, even after the K show:

By employing the intuitive SmartMode user interface, test runs can be started promptly through wizards (quick-start routines), user-defined or pre-defined methods for many different polymer types (differential scanning calorimetry, DSC) or various normconform temperature programs (thermogravimetric analysis, TGA).

Proteus has a sixth sense for detecting thermal effects in polymer DSC and TGA curves and analyzes them autonomously. You can include AutoEvaluation in your measurement method, so that your curves will be evaluated automatically as soon as the test run has finished.

Proteus has a huge, adaptive memory bank called Identify. It compares measurement curves with curves stored in the database and can immediately determine how similar they are. This is perfect for material identification or quality control (pass/fail testing).

Proteus manages an Automatic Sample Changer for up to 192 samples (DSC 204 F1 Phoenix® and TG 209 F1 Libra®) plus a separate tray for 12 calibration materials/ reference pans with ease. And don't worry about calibrations or cooling parameters. Proteus will carry all that out in passing.

Now you have time to take a closer look to the products shown at K 2016

DSC 214 Polyma – 示差走査熱量計

DSC 214 Polyma は、日常の測定において、ハードウエアー、ソフトウエアー共に強力なソリューションを提供します。絶対的な信頼性に加えて、操作が簡単なので、ポリマー材料の研究、開発、品質管理や欠陥分析の理想的なツールといえます。

TG 209 F1 Libra®

豊富な付属品により多様性に富むこの熱重量測定装置は、1100°Cまでの考えられるほとんどの測定に対応します。 この新しいシステムには多くの優れた特長があります: BeFlat® 機能や200K/分までの高速加熱による 即時測定機能、また高耐蝕性セラミック加熱炉はフッ化物や塩化物を含むポリマーの測定にも耐えることができます。c-DTA® 機能により発熱、吸熱反応の検出も可能です。

DSC 204 F1 Phoenix®

超高感度で高分解能は、このプレミアム示差走査熱量計 (DSC)で実現できます。 さらに、オートサンプルチェンジャー (ASC)の装備、温度モジュレーション機能 (TM-DSC)の装備、 ベースライン最適化 (BeFlat®)、熱抵抗と時定数の補正 (DSC-correction)、 QMS やFTIRとの接続、 UV照射機能付加(フォトカロリメーター)までもが可能です。

DMA EPLEXOR Series up to 500 N

The testing instruments of the EPLEXOR® series up to ±500 N enable the dynamic mechanical (or static) characterization of a wide range of different materials including elastomers and polymers, composites, metals, glasses, ceramics, biomaterials and foods, adhesives, and liquids.

NETZSCH is cooperating with the Kunststoff-Institut Lüdenscheid to make material identification easier!

Now the identification of unknown polymers by means of DSC Analysis and database comparison can be done in the blink of an eye.

The Kunststoff-Institut Lüdenscheid offers a polymer database for DSC analysis with 600 data sets for different material samples, each labelled with the appropriate trade name. It includes roughly 130 different polymer types and blends. Additionally, updates and expansions of the database are offered on a regular basis.