Quadrupole Mass Spectrometer Coupling for High Gas Detection Sensitivity from Low to High Mass Range

Quadrupole Mass Spectrometer Coupling for High Gas Detection Sensitivity from Low to High Mass Range

The Fleshed-Out Design of the QMS 403 Aëolos Quadro for Coupling to TGA, STA, DSC and DIL Systems

The 403 Aëolos Quadro quadrupole mass spectrometer is a new compact mass spectrometer with a heated capillary inlet system for routine analysis of gases and, in particular, volatile decomposition products of thermal analysis. This system is optimized for coupling to differential scanning calorimeters (DSCs), thermogravimetric analyzers (TGAs) and dilatometers (DILs).

Capillary Coupling for Optimized Gas Flow Conditions

  • Single-step pressure reduction
  • Minimization of cold spots in the entire transfer path of the gases due to an even temperature of 300°C (optionally 350°C)
  • Heated chamber for easy handling and precise adjustment of the quartz glass capillary inlet to the QMS
  • Flexible, allowing standard thermoanalytical measurements and also simultaneous TGA, MS (GC-MS) and MS-FT-IR measurements
  • Very robust and service-friendly while still maintaining high sensitivity (detectable mass loss in the μg-range)
  • TGA-MS measurements under humid atmospheres possible
  • Hyperbolic quadrupole system with pre-filter for improved transmission in the high mass range and improved sensitivity in the low mass range (e.g., H2, He)
  • SEM with discrete dynodes and integrated Faraday cup for high dynamic range and long lifetime
  • 3-D presentation of MS and thermal analysis data
  • Operation and data evaluation with Proteus® software

Sophisticated Heated Transfer System and Single-Step Pressure Reduction for Loss-Free Gas Transport

The high temperature of the gas transfer system and the absence of pressure reduction orifices practically eliminate condensation of decomposition products during thermal analysis experiments. This achieves a high detection sensitivity and facilitates quantitative detection of all identified gas components.

The inlet system with the capillary allows for the investigation of other gas sources independent of the thermoanalytical system.

Design of the NETZSCH Thermal Analyzers

Already from the outset, NETZSCH thermal analysis devices were developed with the possibility of coupling in mind. Over the last 40 years, the gas transport path – which starts at the furnace outlet and progresses via the adapter and capillary up to the QMS inlet – has been considered and optimized at every new phase in development. Today, any gas loss caused by condensation at cold spots has nearly been eliminated; also, very low carrier gas flow rates are sufficient for complete transfer. The minimal dilution of the volatile sample products released results in high detection sensitivity with the TGA/STA/DIL-QMS 403 Aëolos Quadro.


Application Areas of the QMS 403 Aëolos Quadro Coupling


  • Decomposition                 
    • Dehydration
    • Stability
    • Residual
    • Solvent Pyrolysis
  • Solid-Gas Reactions
    • Combustion
    • Oxidation
    • Corrosion
    • Adsorption
    • Desorption
    • Catalysis
  • Composition Analysis
    • Polymer Content
    • Proximate Analysis
    • Binder Burn-Out
    • Dewaxing
    • Ash Content
  • Evaporation
    • Vapor Pressure
    • Sublimation


Key Technical Specifications

Key Technical Specifications

(subject to change)

  • Mass range:
    1 u to 300 u(*), optionally 512 u, including autotuning
  • Ion source:
    Cross beam El
  • Cathodes/Filaments:
    2 Y2O3-coated iridium cathodes
  • Detector:
    sem with discrete dynodes and integrated Faraday cup
  • Vacuum system:
    turbomolecular pumps with 4-stage diaphragm pump (oil-free)
  • Capillary:
    Quartz-glass (max. 300°C), optionally stainless steel (max. 350°C), with supply coil, easily exchangable
  • Adjustable heating of adapter head:
    Capillary and QMS inlet system to a maximum of 300°C (optionally 350°C)
  • Pressure reduction:
    Single-step, from 10³ mbar to 5x10-6 mbar, no orifice
  • QMS measuring modes:
    Scan analog, scan bargraph, MID
Coupled to TGCoupled to TG
A Single Software Program – Proteus Fully Controls Thermal Analyzer and QMS 403 Aëolos Quadro

A Single Software Program – Proteus Fully Controls Thermal Analyzer and QMS 403 Aëolos Quadro

Proteus® software entirely controls measurements using QMS 403 Aëolos Quadro coupled to a thermal analyzer. The software combines the two coupled methods into a single software application for both control and data acquisition.

  • Individual definition of any parameters relevant to thermal analysis (e.g., temperature program, heating rate, etc.) as well as any parameters relevant to the mass spectrometer (e.g., mass ranges, scans, etc.)
  • Simultaneous start and stop of the hyphenated measurement
  • Evaluation of MS results in Proteus®
  • 3-D presentation of spectra data together with temperature, TGA and/or DSC curves and single mass number traces, including peak determination, different color schemes, and surface views
  • Spectra export in NIST format for identification in the NIST database

Simultaneous presentation of the MS and thermoanalytical data in a 3-D cube. STA-QMS measurement on polystyrol (PS) granules.



With the PulseTA® technique, an exactly defined quantity of gas is injected into the purge gas of the thermobalance (TGA) or the simultaneous thermal analysis instrument. PulseTA® is a perfect tool for achieving quantitative gas detection in separate calibration runs or even online during a sample measurement.

Application of PulseTA®

  • Injection of inert gas for calibration purposes
  • Injection of reactive gas for gas-solid reactions, e.g., reduction of metal oxides by hydrogen pulses
  • Injection of reactive gas for adsorption purposes, e.g., ammonia adsorption by a zeolite 


Uygulama metinleri

Uygulama metinleri

Several standards such as NaHCO3 and CuSO4 * 5H2O are investigated by evolved gas analysis (TG-FTIR and TG-MS) in order to identify and quanitfy the relreased amount of gases

JTAC, Vol 83 (2006) 2, 321

In order to download, the complete paper, please visit Journal of Thermal Analysis and Calorimetry: springerlink.metapress.com/content/f87806577257t86v/

Uygulama metinleri

Several standards such as NaHCO3 and CuSO4 * 5H2O are investigated by evolved gas analysis (TG-FTIR and TG-MS) in order to identify and quanitfy the relreased amount of gases.


published: Thermochim. Acta, 440 (2006) 81

Uygulama metinleri

Investigation of the thermal evolution process of mixed oxide solid films by means of TG-MS

published: Journal of Thermal Analysis and Calorimetry

Uygulama metinleri

Characterization of decomposition products of iron hydroxide sulfate by means of TG-DSC-MS

published: LaborPraxis März 2008


Web yayını

NETZSCH Webinar Evolved Gas Analysis
Unleashing the Power of Thermogravimetric Analysis TGA or STA
NETZSCH-Webinar Measuring Identifying Gas Release from Li-ion Batteries and Battery Materials Decomposition

İlginizi çekebilecek diğer ürünler:

STA 409 CD-QMS 403/5 SKIMMER - Coupling System

Highest detection sensitivity through direct coupling of the STA 409 CD with a quadrupole mass spectrometer (QMS) - evolved gas analysis (EGA) method.

STA 449 F3 Jupiter®

Yeni STA 449 F3 Jupiter® yüksek hassasiyette terazi ve gerçek Diferansiyel Taramalı Kalorimetrenin avantajlarını birleştirir. Çeşitli fırınlar ve TG, TG-DTA ve TGA-DSC sensörleri kullanılabilir, böylece sistem çok yönlü uygulamalar için kolayca  optimize edilebilir.

TGA/STA-GC-MS Coupling

NETZSCH, in collaboration with JAS (Joint Analytical Systems), has forged a breakthrough improvement in evolved gas analysis (EGA). What sets the new coupling system apart is the fact that the start of the measurement is event-driven. This enables temperature-correlated detection of the substances released, which in turn allows for direct correlation with mass loss steps.

STA 449 F1 Jupiter®

Yeni STA 449 F1 Jupiter® piyasaya sunulmasıyla NETZSCH yeni standartlar belirliyor. Sınırsız konfigürasyon esnekliği ve eşsiz performansı sayesinde, seramikler, metaller,plastikler ve kompozitler gibi farklı alanlarda ve geniş sıcaklık aralığında (-150C....2400C) çok çeşitli uygulama olanakları sunmaktadır.

DSC 404 F1 Pegasus® – Yüksek Sıcaklık DSC ‘si

Yeni  NETZSCH DSC 404 F1 Pegasus® Yüksek sıcaklık Diferansiyel Taramalı Kalorimetre cihazı mükemmel güvenilirlik, en iyi çözünürlük ve doğruluk ile geniş bir sıcaklık aralığında öz ısı ve kalorifik etkilerin belirlenebilmesine izin verir. Yüksek vakuma uygun tasarımı, kullanıcı tarafından değiştirilebilen sensör ve farklı fırın seçenekleri yeni DSC 404 F1 Pegasus® cihazını üniversite araştımaları ya da endüstride geliştirme görevleri için yüksek seviyede ideal bir araç haline getirmektedir.

DIL 402 Expedis Select & Supreme

The new dilatometer DIL 402 Expedis Select and Supreme offer state-of-the-art dilatometer technology and are designed for a wide range of sophisticated applications. All instruments of the DIL Expedis series feature the revolutionary NanoEye measuring cell; a new dimension in measuring range and accuracy.

TG 209 F1 Libra®

Flexibility with the fittings of this premium instrument for thermogravimetry allow it to cover almost any imaginable application in the range up to 1100°C. The system has many outstanding features: BeFlat® function allows or immediate measurement upon switching on the unit, the system’s heating rates of up to 200 K/min allow for faster results, while its corrosion-resistant ceramic furnace withstands even fluorine- or chlorine-containing polymers, c-DTA® function for the detection of exothermal and endothermal reactions.